Completed Projects

This is an experimental plane the owner, Chris, built himself. He brought it to us to complete the paint work on it.

We have finished painting, the owner will put the plane together then we will get final pictures of it at the hanger.

This is a 1965 Chevrolet Impala SS Convertivle. When it arrived at our shop we were inititally just going to be doing an all over paint job and a few panel replacements and dent repair. Once we got further into the job we realized it had extensive rust damage and needed a full frame-off restoration. We replaced floor boards and half a quarter panel and did rust repair through out the car. We then body worked and refinished the whole car in black. We also installed a Vintage Aire AC unit.

This is a 1996 Stingray boat, it was old looking and bland. We gutted the boat, tore out the floors and re-fiberglassed them. We then sanded the inside and outside of the boat and painted it, silver fading to a blue that has a prizmatic pearl over it, so it glissens in the sun.

This is a 1969 Mustang, the owner brought the car to us to repaint. It had a vinyl top on it, we stripped the top off and sanded down the car. We welded up the holes on the top part of the quarter panel where there was molding that the owner did not want back in there. We did any additional body work that needed to be done, primed the car, sanded the entire car again, sealed and painted it black.

This is a 1987 BMW M3 which came to us because of extensive rust in the windshield channel. We also found rust in the wheel wells in the front and rear of the car. We repaired all the rust on the windhshield channell and the rust on the wheel wells, then repainted the car.

this is a 2002 Honda CBR954RR motorcycle that was brought to us, it had been in a minor accident and the owner decided he would like to do something different with the color of his bike. He is an avid Malboro lover and wanted to include Malboro on the design of his bike, he also wanted to include flames.

This is a 1955 Austin Healey 100-4. The owner brought the car in for us to paint. The car had rust in the bottom of both quarter panels and fenders. We replaced the rusted out spots and body worked the car to get rid of any dents and wavy spots, we spray polyed the car and primed then painted the car.

This is a 1969 Pontiac GTO.

We repairied a little rust in the winshield channel and a few other areas, then did a little minor body work followed by a fresh coat of paint and clear coat.

This is a 1968 Maserati that we did a frame off restoration on. We media blasted the body and then replaced the driver side front floor board on it and welded up some rust spots through out the car.

We fixed any dents in the body and poly primed the whole car, then sanded it down and primed again before sanding it down once more and sealing, painting and clearing the car

This is a 1971 Chevy C-10 that was brought to us for restoration. We advised the customer that we felt it would be best to find a donor truck that had a cab in better condition then his. We found a donor truck that was in better condition then his, and swapped the cab and pickup box off the donor truck and put them on the frame of the original C-10 since the original trucks frame is in better condition. We did a frame off restoration, put the bed and cab back on the frame after sandblasting both and painting the frame. Completed any body work needing to be done and painted the truck two toned, black and orange with a silver stripe in between.

So far the truck has been in two car shows and won six first place trophies.

This is a 1967 Dodge Charger, the owner started the restoration himself and brought it to us to finish with the bodywork and paint it. This car was his parents car years ago and he wanted to restore it in their memory.

The car has been painted and the exterior mostly put back together. Tom is going to finish putting it back together the rest of the way at home and will do the interior himself. He has promised to bring it back to us when he is finished so we can get some more pictures of the car totally completed.

This is a 1967 Dodge Coronet RT, we soda blasted the exterior of the car as it has about three old paint jobs on it, then we'll prime it and fix any body issues that we found before sealing and painting the car.

This is a 1977 MGB that we stripped and then repainted. There were a few rust issues that needed to be addressed once the car was stripped.

We replaced the door skins because of rust holes and repaired the rockers and a few other areas where there was rust that needed to be cut out and repaired. Then repainted the car.

This is a 89 Corvette the owners brought to us to repaint. Previous paint jobs have left the color mismatched and there are a few minor body issues to fix before we repaint it back to the original white.

The corvette is finished and back home with the Lawrence's, you can see their happy smiles on the last picture below.